Chinese English Where to buy Email: [email protected]

Digital Hygrometer T1

  • Sensor Type:Digital Temperature and Humidity Sensor SHT20
  • Temperature measurement range:-20°C~50°C
  • Refresh time:5 seconds
  • temperature
  • Measurement accuracy:±0.5°C (full scale)
  • Clock accuracy:<12 minutes / year ± 0.3 ° C (25 ° C)
  • Battery type:1.5V AAA (LR03 alkaline battery)
  • Temperature resolution:0.1

We're here to help: Easy ways to get the answers you need.

  • Overview
  • Technical Data
  • Inquiry
Description:
Digital Hygrometer Indoor Thermometer Gauge Indicator Temperature Humidity Meter
ATLAS Sensirion SHT20 LCD Digital Hygrometer Indoor, Stylish Mini Room Thermometer Gauge Indicator, Accurate Temperature Humidity Monitor Meter for Computer Room, Laboratory, Archives, Villa
Basic operation:
Install the two 1.5V AAA batteries correctly in the battery compartment and the instrument will automatically turn on.
Remove the battery from the battery compartment and the instrument will automatically shut down.
time adjustment (adjust hour and minute)
In the normal display mode, press the button and button simultaneously to enter the time adjustment mode. The ten digits of the hour data in the time data (not displayed if the ten-digit value is "0") enters the blinking state.
In the time adjustment mode, press the button to select the data to be adjusted, and press the button to increase the value of the selected data.
After adjusting the time data to the desired value, press the button and button simultaneously to complete the time adjustment and return to the normal display mode.
Turning on and off the backlight (the backlight is in the off mode when the instrument leaves the factory)
In backlight off mode, press and hold for 3 seconds, the backlight of the display will turn on.
In backlight-on mode, press the button for 3 seconds and the backlight of the display will turn off.
Switching of temperature units (degrees Celsius / Fahrenheit)
In the temperature unit of Celsius mode, press the button for 3 seconds and the unit switches to Fahrenheit.
When the temperature unit is in Celsius mode, press the button for 3 seconds and the unit switches to Celsius.
Sensor Type:Digital Temperature and Humidity Sensor SHT20
Temperature measurement range:-20°C~50°C
Refresh time:5 seconds
temperature
Measurement accuracy:±0.5°C (full scale)
Clock accuracy:<12 minutes / year ± 0.3 ° C (25 ° C)
Battery type:1.5V AAA (LR03 alkaline battery)
Temperature resolution:0.1
Storage environment:-40°C~70°C
Humidity measurement range:0%~100%RH
Shell material:ABS
humidity
Measurement accuracy:±3%RH (20%RH~80%RH, 25°C)
Housing size:105x105x20mm ±5%RH (other range)
Humidity resolution:0.1 degree of protection IP50
Inquiry >>